Flash / Unbrick LG VOLT LS740 ZV3 ZV6 Stock TOT Rom
Unbrick or Flash your phone with stock TOT Rom , ZV3 and ZV6.
Is your phone stuck on LG Logo or it doesn’t boot then follow this post to revive it back.
Follow this post to update your lg phone .
Download The Required Files
- Download and Install LG Mobile Driver 4.1.1
- Download Latest LG Flash Tool 1.8 and Megalock.dll (install LG Flash Tool , Copy and Replace megalock.dll in C:\LG\LGFlashTool folder)
- Download LG FLash DLL For Volt LS740 & Stock TOT Rom LS740 Volt
Instructions for LG Flash Tool 1.8
- First LG Flash Tool , Copy and Replace megalock.dll in C:\LG\LGFlashTool folder
- Run LG FLash tool on your PC.
- Connect your LG phone to your PC/laptop in download mode (when phone is off , Hold volume UP and Plug usb cable).
- Change port number to 41. Go to device manager and find LGE Mobile USB Serial Port (COMxx) (where xx is the port number). Click on Properties > Port Settings > Advance > Change COM Port Number to COM41.
- Run LG Flashtool,Select Manual Mode at the top
- Click The DLL Box and choose the DLL file from Above meant for your device
- Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
- Now Click the Yellow Arrow Button (Start download button) at the top left, Waiting for the CRC check process.
- When The Flash tool is ready, unplug and replug phone, The Flash Tool will automatically begin Flash process.
- About 4-8 Minutes later, Flash is complete, the phone will automatically boot.
Please Note: Before Flashing Firmware make sure that your phone’s current firmware version is either same or below to the version which you are flashing. always flash same version or updated version , if you try to downgrade your phone firmware version it make cause phone Hard Brick.
For any assistance please contact us through Contact Us page.